Point of Use Dryers- Zero Air Loss
Point of use driers super dry.
The Nex Flow® Super Dry dew point lowering system is for point of use applications and is installed after your filtration system prior to the device consuming the compressed air.
Point of Use Dryers- Zero Air Loss explained. Even if you have an existing central air drier with your compressed air system and filtration, you may have a dew point issue but still have water going into your compressed air-operated device.
The Dew point is the temperature at which water vapor in your compressed air is now without vapor. It condenses to a liquid form. If enough condensation forms, you can have free-flowing water in your air delivery system.
Leaks, system design, or the nature of the compressed air-operated device can have condensation.
If the dew point, for whatever reason,
- changes by the time the air reaches its intended application
- or is not low enough.
Using compressed air for “breathing” or plastic drying can be a problem if the dew point rises beyond a certain level during compressed air transmission to the point of use.
Using vortex tubes are and, if the dew point needs to be higher, ice crystals can temporarily form inside some designs and cause intermittent operation.
The Nex Flow® Super Dry dew point lowering system is for point-of-use applications. You are installing your filtration system before the device consumes the compressed air.
The single tower or inline systems are a low-cost solution with replaceable cartridges. That utilizes quality moisture-absorbing material to lower the dew point to an acceptable level.
If particulate and existing water in the compressed air delivery system is a problem, review your filtration system.
If the existing filtration system is not addressing this issue adequately, consider the Nex Flow® Super Separator
| Weight | 3 kg |
|---|---|
| Type | Point of Use Driers, Replacement Kits & Parts |
| Model | D1 Tower Drier to 70 SCFM, D2 Tower Drier to 100 SCFM, D3 Tower Drier to 200 SCFM, D4 Tower Drier to 300 SCFM, ATD ¼ In-Line Drier to 22 SCFM, ATD 1/2 In-Line Drier to 44 SCFM, ATD 1/2 CL In-Line Drier to 44 SCFM, ATD ¼ XL In-Line Drier to 25 SCFM, ED1 Replacement Kit for D1, ED2 Replacement Kit for D2, ED3 Replacement Kit for D3, ED4 Replacement Kit for D4, TD ¼ Electric Timer Drain for D-Series (110V), TD ¼ Electric Timer Drain for D-Series (220V), TD ¼ Electric Timer Drain for D-Series (12V), Humidity Temperature Gauge, EATD Replacement Kit for ATD ¼ and ATD ½, EATD-XL Replacement Kit for ATD-XL, EATD-½ CL Replacement Kit for ATD-½-CL, ATD – FX Fixing Clip for ATD ¼ and ATD ½ |
| SKU | Type | Model | ||
|---|---|---|---|---|
| 92290-122 | Replacement Kits & Parts | EATD-½ CL Replacement Kit for ATD-½-CL | ||
| 92280-110 | Point of Use Driers | D1 Tower Drier to 70 SCFM | ||
| 92280-120 | Point of Use Driers | D2 Tower Drier to 100 SCFM | ||
| 92280-130 | Point of Use Driers | D3 Tower Drier to 200 SCFM | ||
| 92280-140 | Point of Use Driers | D4 Tower Drier to 300 SCFM | ||
| 92290-100 | Point of Use Driers | ATD ¼ In-Line Drier to 22 SCFM | ||
| 92290-101 | Point of Use Driers | ATD 1/2 In-Line Drier to 44 SCFM | ||
| 92290-104 | Point of Use Driers | ATD 1/2 CL In-Line Drier to 44 SCFM | ||
| 92290-102 | Point of Use Driers | ATD ¼ XL In-Line Drier to 25 SCFM | ||
| 92280-210 | Replacement Kits & Parts | ED1 Replacement Kit for D1 | ||
| 92280-220 | Replacement Kits & Parts | ED2 Replacement Kit for D2 | ||
| 92280-230 | Replacement Kits & Parts | ED3 Replacement Kit for D3 | ||
| 92280-240 | Replacement Kits & Parts | ED4 Replacement Kit for D4 | ||
| 92320-210 | Replacement Kits & Parts | TD ¼ Electric Timer Drain for D-Series (110V) | ||
| 92320-230 | Replacement Kits & Parts | TD ¼ Electric Timer Drain for D-Series (220V) | ||
| 92320-211 | Replacement Kits & Parts | TD ¼ Electric Timer Drain for D-Series (12V) | ||
| 92320-100 | Replacement Kits & Parts | Humidity Temperature Gauge | ||
| 92290-120 | Replacement Kits & Parts | EATD Replacement Kit for ATD ¼ and ATD ½ | ||
| 92290-121 | Replacement Kits & Parts | EATD-XL Replacement Kit for ATD-XL | ||
| 92290-310 | Replacement Kits & Parts | ATD – FX Fixing Clip for ATD ¼ and ATD ½ |
