Standard Air Nozzles

April 2, 2024
Blow hard or blow soft
April 2, 2024
Categories

Blow Hard Or Blow Soft? What is the Best for your Application

Blow hard or blow soft? That is an important question to answer based on your application needs. Cleaning and drying applications involve either wiping or using compressed air or blowers. The contact between the material and the product […]
Do you like it?
Read more
October 17, 2023
Impact of Pressure Drop Blog
October 17, 2023
Categories

The Underestimated Impact of Pressure Drop

.Compressed Air Systems and Performance Efficiency Pressure drop is a crucial aspect of compressed-air technology that is often overlooked. It is defined as the reduction in air pressure from the compressor discharge to the point of use. And […]
Do you like it?
Read more
August 15, 2023
NEX FLOW Compressed Air Scrub Nozzle
August 15, 2023
Categories

Compressed Air Scrub Nozzle: New Product

The NEW NEX FLOW Compressed Air Scrub Nozzle simulates pulsing air to clean and dry tough surfaces. Historically, people have used Pulsing Compressed Air since solenoid valves came into existence. And it offers specific advantages over continuous compressed […]
Do you like it?
Read more
July 13, 2021
Seven Ways to make your Compressed Air Blow off and Cooling More Efficient
July 13, 2021
Categories

Seven Ways to make your Compressed Air Blow off and Cooling More Efficient

Seven Ways to make your Compressed Air Blow off and Cooling More Efficient The majority of compressed air is used for blow off and cooling despite the push for alternate technologies like blowers simply because it is still […]
Do you like it?
Read more
May 5, 2021
May 5, 2021
Categories

What is the Difference between pneumatics and hydraulics?

Pneumatics vs Hydraulics With the advent of the Covid 19 pandemic, there has been an acceleration toward automation. Packaging solutions and advances have also become important. Pneumatics plays a very large part in both automation and packaging as […]
Do you like it?
Read more
March 4, 2020
compressed air consulting service
March 4, 2020
Categories

Compressed Air Consultation to take the confusion out of compressed air use.

Nex Flow offers compressed air consultation on the use of compressed air “after” the air compressor room to optimize the use of “what you have” so as to minimize waste and cost while getting the most use out […]
Do you like it?
Read more
November 15, 2019
The Nex Flow Difference
November 15, 2019
Categories

The Nex Flow Difference: Why we treat our materials differently?

The Nex Flow Difference: Why we treat our materials differently? Nex Flow Air Products Corp. sets itself apart from its competitors by doing a few things differently with the materials that we use in manufacturing our products. While […]
Do you like it?
Read more
November 8, 2019
November 8, 2019
Categories

Use Air Amplifiers and Vortex tubes to Emulate Wind Tunnel for lab tests

Wind tunnels are large tubes with air moving inside. These tunnels are used to test models of aircraft or other flying objects on their actions in flight. These models are scaled down versions of actual objects that will […]
Do you like it?
Read more
October 18, 2019
Using Compressed Air in Packaging
October 18, 2019
Categories

How is Compressed Air used to Package Products?

Using Compressed Air in Packaging Compressed air is safe, reliable, and used in packaging products. The compressed air systems move materials from one area of the factory to another, perform blow-off, part drying, and align products for packaging. […]
Do you like it?
Read more
August 21, 2019
Galvanic corrosion explained
August 21, 2019
Categories

Galvanic Corrosion – What it is and how to prevent it?

Galvanic Corrosion – What it is and how to prevent it? Galvanic corrosion (also called bimetallic corrosion) is an electrochemical process in which one metal corrodes preferentially when it is in electrical contact with another, in the presence […]
Do you like it?
Read more
August 8, 2019
August 8, 2019
Categories

Air Amplification Explained – Is it really free?

Air Amplification Explained compressed air-operated amplifiers presume to reduce compressed air use and lower noise levels in blow-off and cooling applications. The term air amplifier is normally applied to annular-shaped units (called Air Amplifiers or Air Movers).  However, […]
Do you like it?
Read more
July 18, 2019
Hollywood Special Effects
July 18, 2019
Categories

Hollywood Special Effects with Nex Flow® Compressed Air Accessories

Hollywood Special Effects with Nex Flow® Compressed Air Accessories Not only have Nex Flow® products been used for Hollywood special effects for US made movies but also for movies made by other jurisdictions and for special effects in […]
Do you like it?
Read more
June 7, 2019
Case Study Muffins and Chicken Nuggets
June 7, 2019
Categories

Case Study: Nex Flow Air Knife Making Chicken Nuggets and Delicious Muffins

Case Study: Nex Flow Air Knife Making Chicken Nuggets and Delicious Muffins Making muffins, or any mass food production operation has critical standards of quality that must be met. If cooking or baking is involved the heat needs […]
Do you like it?
Read more
May 13, 2019
Routine Check Ups on Compressed Air
May 13, 2019
Categories

How often should I Perform Routine Check-ups on my Compressed Air System? What should I Look for?

In the previous blog, we focused on tips to prolong the life of your compressed air accessories. Today we will discuss the importance of establishing an inspection routine for your entire compressed air system along with a checklist […]
Do you like it?
Read more
May 7, 2019
Prolong the Life of your products
May 7, 2019
Categories

How to Prolong the Life and Get Superior Performance from Compressed Air Accessories

Nex Flow compressed air accessories can complement and enhance your compressed air systems. Awareness of the best accessories (based on application) can save energy, extend the lifespan of equipment, and provide a safe environment for workers when using […]
Do you like it?
Read more
March 25, 2019
Plan with Nex Flow CAD models
March 25, 2019
Categories

Plan with Nex Flow CAD Models, Drawings and Product Dimensions

Plan With Nex Flow CAD Models Today! Some product manufacturers require you to register your personal data to obtain drawings and technical data. Nex Flow does not – as we believe “information that will help you in choosing […]
Do you like it?
Read more
March 11, 2019
March 11, 2019
Categories

Compressed Air Uses in the Automotive Manufacturing Industry

Compressed Air Uses in the Automotive Manufacturing Industry Advanced computer technologies, automated assembly systems, and high-quality compressed air systems have changed the automotive manufacturing industry. Consumers can purchase safer, more fuel-efficient and reliable vehicles today than ever before. […]
Do you like it?
Read more
February 18, 2019
Compressed Air Standards
February 18, 2019
Categories

Compressed Air Standards ISO 8573, ISO 12500, CFR 1910.242(b) and related terms

Recommended compressed air standards and related terms There are several major standards to consider with the use of compressed air – two with regard to air quality, one for compressed air safety and any local standards related to […]
Do you like it?
Read more
January 7, 2019
Amplifier vs Jet vs. Knife
January 7, 2019
Categories

Air Amplifier vs. Air Jet vs. Air knife – How do I know which one to use

What are Air Amplifiers, Jets, and Knives? Air Amplifier There are two types of Air Amplifiers – Air Pressure Amplifiers and Air Volume Amplifiers.   This article talks about volume amplifiers, which harness the energy from a small parcel […]
Do you like it?
Read more
November 6, 2018
what does DBA mean
November 6, 2018
Categories

What does dBA mean when someone talks about noise levels?

“What does dBA mean when someone talks about noise levels?” Compressed air exhaust produces noise whether from cylinders, solenoid valves, or from blow off nozzles.  Air conditioning and cooling technology has become more advanced as individual, industrial, and […]
Do you like it?
Read more
October 16, 2018
October 16, 2018
Categories

Factors to Consider when Selecting an Air Nozzle

What is an Air Nozzle? An air nozzle controls the direction or characteristics of air flow by converting pressure into the flow. Air Nozzles are the smallest air amplifiers for point application. Frequently Nozzles control the flow rate, […]
Do you like it?
Read more
July 6, 2018
July 6, 2018
Categories

How Piping Can Effect Air Nozzle Performance

How Piping Can Effect Air Nozzle Performance Compressed air is a tricky technology to deal with because it is a compressible fluid and is subject to all sorts of things. Yet 70% of all compressed air is still […]
Do you like it?
Read more
We are using cookies to give you the best experience on our website.
Privacy Policy